Annie Chemie P Ltd. India Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of oil field shale gas fracking or hydraulic fracturing chemicals and it has substantial exports to countries like USA, Canada, Russia, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium bromate etc. We also offer other coated or encapsulated products like citric acid, guar crosslinkers etc. Other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard etc. are also offered.

Home ----------------- Contact Us

Zirconium Cross Linker & Boron Cross Linker Solution for Guar Gum Slurry- Shale Gas Hydraulic Fracturing Chemical Manufacturer

Boron Cross Linker Solution
For Guar Gum Slurry Shale Gas Hydraulic Fracturing
Boron cross linker

BBG-XL-4
>
4% Boron, pH Buffered, Borate based liquid, Green Cross Linker. It is a green, glycol-free solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.

DESCRIPTION
BBG-XL-4 high Boron content buffered liquid Crosslinker.  It is a green, glycol-free solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.
BBG-XL-4 offers convenience and flexibility in the creation & use of high viscosity cross linked gels which potentially increase fracture width and allow higher proppant loading.
BBG-XL-4 can be added on the fly, typical loading rates are 1 to 3 gpt based on fluid properties desired.

TYPICAL PHYSICAL PROPERTIES

Parameter Specification
Appearance Clear Liquid
Odor None
Boron Content 4%
Specific Gravity 1.3 to 1.4
pH 11 to 13
Pour Point 20 deg F

Compatibility: Compatible with most known fracturing fluids additives used in all types of guar and guar derivatives. However, a compatibility test is recommended before use.

Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result.

Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.


CX-10
4% Boron, Non-Buffered, Instant, Borate based, Cross Linker

Use: CX-10 is a high Boron content non-buffered liquid Cross Linker. It is a solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.

CX-10 offers convenience and flexibility in the creation & use of high viscosity cross linked gels which potentially increase fracture width and allow higher proppant loading.

CX-10 can be added on the fly, typical loading rates are 1 to 3 gpt based on desired fluid properties.

CX-10 should be used with a delayed buffer to reduce pumping horsepower requirements.

Physical & Chemical Properties:
Appearance: Clear Liquid
Odor: Glycol
Boron Content: 4% min
Specific Gravity: 1.1 to 1.20
pH: 4 to 9
Pour Point: 10 deg F

Compatibility: Compatible with most known fracturing fluids additives for use with all types of guar and guar derivatives. A compatibility test is always recommended before use.

Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result

Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.


CX-14
4% Boron, Delayed, Borate based, Cross Linker

Use: CX-14 is a high Boron content delayed liquid Cross Linker. It is a solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.

CX-14 is a suspension of slowly dissolving Boron particles and gives a typical crosslinking delay of 0.5 to 5 minutes, depending on loading and other conditions.

CX-14 can be winterized to extremely low pour-points for use in colder environments

CX-14 can be added on the fly, typical loading rates are 1 to 3 gpt based on desired fluid properties.

CX-14 should be used with a buffer to reduce pumping horsepower requirements.

Physical & Chemical Properties:
Appearance: Tan Liquid
Odor: Slight
Boron Content: 4% min
Specific Gravity: 1.35 to 1.45
pH: 4 to 9
Pour Point: 20 deg F

Compatibility: Compatible with most known fracturing fluids additives for use with all types of guar and guar derivatives. A compatibility test is always recommended before use.

Typical Dosage: Typically used at 1 to 3 GPT depending on well conditions and desired result

Temperature Limitations: Can be used across a wide temperature range, no lower or upper temperature limitations on performance. Typically used in wells with BHT up to 275 F, however the product will produce gels that are stable up to 350 F.


We also offer Biodegradable Zirconium based Cross Linker. It is offered as solvent based liquid and as granular delayed and temperature based release encapsulated.

Zirconium Cross Linker & Boron Cross Linker Solution for Guar Gum Slurry, Fracking Chemical Manufacturer:

Annie Chemie P Ltd
Mazgaon, Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

e-mail: info@anniechemie.com

Copyright and Usual Disclaimer is Applicable.
June 1, 2017

Exporters to USA, Canada, Russia, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.

Perfection is made up of  small things and that is a big thing.

It is nice to be improtant but it is more important to be nice.