Cupric Chloride or Copper II Chloride SDS of Manufacturer

Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of Cupric Chloride or Copper II Chloride USP Reagent Grade and oil field shale gas fracking or hydraulic fracturing chemicals and speciality chemicals and it has substantial exports to countries like USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Kuwait, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium persulfate, potassium peroxymonopersulfate, sodium bromate etc. We also supply other coated or encapsulated products like citric acid, guar crosslinkers other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard and several speciality chemicals.

Cupric Chloride or Copper II Chloride SDS of Suppliers Exporters, Manufacturers

Cupric Chloride or Copper Chloride Anhydrous & Dihydrate Anhydrous
SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

Product Name & Other Names: Copper chloride or Cupric chloride Coppertrace or Copper (2+) chloride.
CAS Number.: 10125-13-0 Dihydrate 7447-39-4 Anhydrous.
EINECS EC Number: 231-210-2

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral Category 4, H302
Skin irritation Category 2, H315
Serious eye damage/eye irritation Category 1, H318
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335
Hazardous to the aquatic environment, long-term hazard Category 2 , H411

Hazard statements:
H302: Harmful if swallowed.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.
H411: Toxic to aquatic life with long lasting effects.

Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.

Product Name & Other Names: Copper chloride or Cupric chloride Coppertrace or Copper (2+) chloride.
CAS Number.: 10125-13-0 Dihydrate 7447-39-4 Anhydrous.
EINECS EC Number: 231-210-2

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

Flammability of the Product: Non-flammable.
Explosion: Slightly explosive in presence of heat & Metals.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Extinguishing Media Not recommended: None specified.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. On decomposition it may emit hydrogen chloride. Containers may explode on heating.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

Very Harmful! Do not ingest.
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents, metals & acids.

Airborne Exposure Limits: Permissible 1 mg/m3 TWA (dust and mist, as Cu, except copper fume) (listed under copper compounds, n.o.s.).100 mg/m3 IDLH (dust and mist, as Cu) (listed under copper compounds, n.o.s.).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards.

Appearance: Fine brown powder or crystals
Odor: It is odorless.
Odor threshold: Not available.
pH: around 3
Relative density: around 3.38.
Melting point/freezing point: Not available.
Boiling Point: 993C
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is soluble in water.
Viscosity: Not available.

Stability: Hygroscopic. Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits toxic chlorine or hydrogen chloride fumes when heated to decomposition. It may form cupric oxide and hydrogen chloride and chlorine.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, metals & acids. Also incompatible with potassium, sodium, hydrazine, nitromethane, acetylene, sodium hypobromite.
Conditions to Avoid: Incompatibles and moisture.

Acute toxicity
Very Harmful if swallowed. Chronic exposure may cause damage to a variety of body organs. Toxicity data
CAS# 7447-39-4
Oral, mouse: LD50 = 233 mg/kg;
Oral, rat: LD50 = 584 mg/kg;
Oral, rat: LD50 = 140 mg/kg.
Carcinogenic Effects: Not known to be a carcinogen.
Mutagenic Effects: Mutagenic for bacteria and/or yeast. May cause damage to the following organs: kidneys, lungs, liver, skin.
Teratogenic Effects: No data found.
Developmental Toxicity: No data found.

Environmental Toxicity: It is also toxic to fish. Harmful to aquatic life even in extremely low concentrations. Copper Chloride Anhydrous is toxic to fish and marine organisms when applied to streams, rivers, ponds, or lakes.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

DOT USA, TDG Canada & ADR/RID Europe:
UN-Number: UN 2802
Shipping Name: Copper Chloride
CLASS 8, Packing group: III, Identification: 8(Corrosive)
IATA/ICAO:
UN-Number: UN 2802
Shipping Name: Copper Chloride
CLASS 8, Packing group: III, Identification: 8(Corrosive)
IMDG/IMO:
UN number: 2802
Class: 8, Packing group: III, EMS-No: F-A, S-B
Proper shipping name: COPPER CHLORIDE

USA:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Cupric Chloride CAS Number 10125-13-0 for Dihydrate & 7447-39-4 for Anuydrous or Copper II Chloride USP Reagent Grade Supplier Exporter, Manufacturer:

Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

Exporters to USA, Canada, China, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.