Annie Chemie P Ltd. India Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of Aluminum Glycinate or Dihydroxyaluminum Aminoacetate & Dihydroxyaluminum Sodium Carbonate and oil field shale gas fracking or hydraulic fracturing chemicals and speciality chemicals and it has substantial exports to countries like USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Kuwait, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium persulfate, potassium peroxymonopersulfate, sodium bromate etc. We also supply other coated or encapsulated products like citric acid, guar crosslinkers other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard and several speciality chemicals.

Home ----------------- Contact Us

Dihydroxyaluminum Sodium Carbonate SDS of Suppliers Exporters, Manufacturers

Dihydroxyaluminum Sodium Carbonate
CAS Number: 539-68-4, 16482-55-6 USP Grade Suppliers Exporters, Manufacturers
Dihydroxyaluminium Sodium Carbonate Manufacturers Exporters

Please visit Main Page of Dihydroxyaluminum Sodium Carbonate USP Grade Manufacturers.

Dihydroxyaluminum Sodium Carbonate or Dihydroxyaluminium Sodium Carbonate SDS, Safety Data Sheet
MSDS Sheet
11-May-22

1. Product Identification

Product Name & Other Names: Dihydroxyaluminum Sodium Carbonate or Dihydroxyaluminium Sodium Carbonate or Sodium (carbonato)dihydroxyaluminate.
CAS No.: 539-68-4 or 16482-55-6
EINECS EC Code: 234-567-2 or 240-536-4
Relevant uses and uses advised against (if any): Industrial use.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling Regulation as per GHS & EC 1272/2008 (CLP) & GHS

GHS Label Elements
NONE

Signal Words: None

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

3. Composition/Information on Ingredients

Product Name & Other Names: Dihydroxyaluminum Sodium Carbonate or Dihydroxyaluminium Sodium Carbonate or Sodium (carbonato)dihydroxyaluminate.
CAS No.: 539-68-4 or 16482-55-6
EINECS EC Code: 234-567-2 or 240-536-4

4. First Aid Measures

Always seek medical advice after the first aid treatment.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.

5. Fire Fighting Measures

Auto ignition temperature: NA
Combustible. High heat or direct flame is necessary to cause ignition. Toxic fumes Aluminum & Sodium oxides and carbon monoxide may be formed in fire.
Fire Extinguishing Media: Dry chemical, foam, or carbon dioxide. Do not use a solid stream of water since the stream will scatter and spread the fire. Water spray may be used to keep fire exposed containers cool.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Keep away from heat. Keep away from sources of ignition. Provide ventilation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents and acids. Store in light resistant containers. Prevent any electrostatic discharge.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: Not available. Consult local authorities for acceptable exposure limits.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron, or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full-face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

9. Physical and Chemical Properties

Appearance: Solid Crystals or Powder.
Odor: odorless.
Odor threshold: Not applicable.
pH: No data found.
Relative density: No data found.
Melting point/freezing point: No data found.
Initial boiling point and boiling range: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: Insoluble in cold water
Viscosity: No data found.
Molecular Weight: 143.99
Chemical Formula: NaAl(OH)2CO3

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, sodium oxide, aluminum oxide and toxic fumes may form when heated to decomposition.
Hazardous Polymerization: Not reported. However, it can explode under certain conditions.
Incompatibilities: Acids, oxidizing agents, heat, and sparks.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.

11. Toxicological Information

Oral rat LD50: No data found.
Mutagenic effects: No data found.
Teratogenicity: No i No data found.
Reproductive Effects: No data found.
Carcinogenicity: Not listed as a carcinogen by OSHA and NTP.

12. Ecological Information

Environmental Toxicity: No data found.
The product and the products of its degradation are not known to be toxic.
Persistence and Degradability: No data found.
Mobility: No data found.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not controlled goods.
IMO/IMDG: Not controlled goods.
ICAO/IATA: Not controlled goods.

15. Regulatory Information

USA:
SARA 311/312 Hazards
: Not listed.

16. Other Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Dihydroxyaluminum Sodium Carbonate Suppliers

Please visit Technical Data Sheet of Dihydroxyaluminum Sodium Carbonate USP Grade Suppliers.

Aluminum Glycinate or Dihydroxyaluminum Aminoacetate CAS Number 41354-48-7 or 13682-92-3 & zzDihydroxyaluminum Sodium Carbonate CAS Number 539-68-4, 16482-55-6 Supplier Exporter, Manufacturer:

Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

e-mail: info@anniechemie.com

Copyright and Usual Disclaimer is Applicable.
September 27, 2023

Exporters to USA, Canada, China, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.

Perfection is made up of small things and that is a big thing.