Annie Chemie P Ltd. India Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of oil field shale gas fracking or hydraulic fracturing chemicals and it has substantial exports to countries like USA, Canada, Russia, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium bromate etc. We also offer other coated or encapsulated products like citric acid, guar crosslinkers etc. Other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard etc. are also offered.

Home ----------------- Contact Us

Flow Back Aid or Water Recovery Surfactant - Shale Gas Hydraulic Fracturing Chemical Manufacturer

Flow Back Aid or Water Recovery Surfactant
For Shale Gas Hydraulic Fracturing
Flow Back Aid or Water Recovery Surfactant

Surfactant S-112, Water Recovery Surfactant (FlowBack Aid)

Use:

S-112 is a non-ionic, non-flammable surfactant for use in acidizing and fracturing treatments. It is designed to improve recovery of the injected stimulation fluids and enhance ultimate recovery of hydrocarbons.

S-112 effectively lowers interfacial tension between stimulation fluids and hydrocarbons. It lowers the capillary pressure and allows for greater penetration in to the formation face, therefore promoting the recovery of stimulation fluids, connate fluids and hydrocarbons.

S-112 is compatible with all known fracturing fluid additives and has been successfully used for the past few years. S-112 is also pumped with acid spearheads to lower the breakdown pressures and minimize the possibilities of forming acid/oil emulsions where a separate non-emulsifier is not used.

Physical & Chemical Properties:
Appearance: Clear, Straw Yellow Liquid
Odor: Faint Organic
Density: 8.4 lbs/ga
Pour Point: Less than 20 deg F
Flash Point: Greater than 175 deg F
Typical Surface Tension: Less than 30 dynes/cm2
Typical Interfacial Tension: Less than 3 mN/m
Wetting Characteristic: Water Wetting

Compatibility: S-112 is compatible with most acidizing and fracturing treatment additives and friction reducers. However, a compatibility test is advised before use.

Typical Dosage: Typically used at 1 to 2 GPT with stimulation fluids

Temperature Limitations: Can be used across a wide temperature range, no lower temperature limitation on performance. Has been effectively used up to BHT of 350 F.

Flow Back Aid or Water Recovery Surfactant, Fracking Chemical Manufacturer:

Annie Chemie P Ltd
Mazgaon, Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

e-mail: info@anniechemie.com

Copyright and Usual Disclaimer is Applicable.
June 1, 2017

Exporters to USA, Canada, Russia, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.

Perfection is made up of  small things and that is a big thing.

It is nice to be improtant but it is more important to be nice.