Phenyl Mercuric Acetate SDS of Manufacturer

Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of Phenyl Mercuric Acetate & Phenyl Mercuric Nitrate and oil field shale gas fracking or hydraulic fracturing chemicals and speciality chemicals and it has substantial exports to countries like USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Kuwait, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium persulfate, potassium peroxymonopersulfate, sodium bromate etc. We also supply other coated or encapsulated products like citric acid, guar crosslinkers other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard and several speciality chemicals.

Phenyl Mercuric Acetate or Phenylmercuric Acetate SDS of Suppliers Exporters, Manufacturers

Phenyl Mercuric Acetate
CAS Number: 62-38-4 or Phenylmercuric Acetate Suppliers Exporters, Manufacturers
Phenylmercuric Acetate Manufacturers Exporters

Phenylmercuric Acetate Manufacturers Exporters

Phenyl Mercuric Acetate or Phenylmercuric Acetate SDS, Safety Data Sheet
MSDS Sheet 11-May-22

Product Name & Other Names: Phenyl Mercuric Acetate or Mercury phenyl acetate.
CAS No.: 62-38-4
EINECS EC Number: 200-532-5
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Oral (Category 2), H300
Skin corrosion/irritation Category 1A, B, C H314
Specific target organ toxicity, repeated exposure Category 1, H372
Chronic aquatic toxicity (Category 1), H410

Hazard statements:
H300 Fatal if swallowed.
H314 Causes severe skin burns and eye damage.
H372 Causes damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P363: Wash contaminated clothing before reuse.
P391: Collect spillage.
P405: Store locked up.

Product Name & Other Names: Phenyl Mercuric Acetate or Mercury phenyl acetate.
CAS No.: 62-38-4
EINECS EC Number: 200-532-5

Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin: Immediately flush skin with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and shoes before reuse. Get medical attention if irritation develops.
Eyes: Immediately flush eyes with plenty of water for 15 minutes, occasionally lifting upper and lower eyelids. Hold eyelids apart during irrigation. Get medical attention.
Inhalation: Remove person to fresh air. If breathing is difficult, give oxygen. If not breathing administer artificial respiration. Get medical attention.

Fire/Explosion: Not considered to be a fire and explosion hazard.
Extinguishing Medium: Water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance/ mixture: Mercury oxides, carbon oxides and fumes.
Fire Fighting Instructions: Use suitable protective equipment for surrounding fire.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Do not touch or walk through this product. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents and strong acids.

Exposure Limits for Phenyl Mercuric Acetate:
USA. NIOSH Recommended Exposure Limits: 0.05mg/m3 TWA.
ACGIH TLV: 0.1 mg/m3 (TWA).
Engineering Controls: Use adequate exhaust ventilation to keep airborne concentrations below the allowable exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Appearance: Beige powdered solid.
Odor: Not available.
Odor threshold: Not available.
pH: No data found.
Relative density: No data found.
Melting point/freezing point: Melting point/range: 148 - 151C.
Initial boiling point and boiling range: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility(ies): No data found.
Viscosity: No data found.
Chemical Formula: C8H8HgO2
Molecular Weight: 336.74

Chemical Stability: Stable under normal temperatures and pressures.
Incompatibility (Materials to Avoid): Strong acids and strong oxidizing agents,.
Conditions to Avoid: Incompatible materials, exposure to moist air or water, excessive heat.
Hazardous Decomposition Products: Mercury oxides, carbon oxides and fumes.
Hazardous Polymerization: Will not occur.

Toxicity to Animals: LD50 Oral - Rat - 41 mg/kg.
Carcinogenicity: Not listed as a suspected/confirmed carcinogen by NTP, OSHA.
IARC: 2B - Group 2B: Possibly carcinogenic to humans (Phenylmercury acetate).
Teratogenic Effects: No data found.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.

Toxicity to fish: LC50 - Oncorhynchus mykiss (rainbow trout) - 0.0090 mg/l - 96.0 h
Toxicity to daphnia and other aquatic invertebrates: LC50 - Daphnia pulex (Water flea) - 0.005 mg/l - 3 h
Ecotoxicity: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Persistence and Degradability: No data found.
Mobility: No data found.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found.

Dispose of in accordance with all applicable local, state, and federal regulations at an approved waste disposal facility.

Section 14. Transport and Label Information
DOT USA, TDG Canada & ADR/RID Europe:
UN-No UN 1674
Proper Shipping Name: Phenylmercuric acetate
Hazard Class 6.1; Packing Group II
IMDG/IMO
UN-No UN 1674
Proper Shipping Name: Phenylmercuric acetate
Hazard Class 6.1; Packing Group II
IATA/IATA:
UN-No UN 1674
Proper Shipping Name: Phenylmercuric acetate
Hazard Class 6.1; Packing Group II.

USA:
SARA 311/312 Hazards: Acute Health Hazard, Chronic Health Hazard. See section 2.
California Prop. 65 Components: WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive, CAS-No.: 62-38-4

Phenyl Mercuric Acetate or Phenylmercuric Nitrate CAS Number 62-38-4 & Phenyl Mercuric Nitrate CAS Number 8003-05-2 Supplier Exporter, Manufacturer:

Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

Exporters to USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.

GHS Label Elements Aquatic Toxicity	GHS Label Elements Toxic
GHS Label Elements Health Hazard	GHS Label Elements Corrosive