Sodium Phosphate Dibasic SDS of Manufacturer Exporter

Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of Monosodium Disodium Trisodium Phosphate Sodium Phosphate Monobasic Dibasic Tribasic and oil field shale gas fracking or hydraulic fracturing chemicals and speciality chemicals and it has substantial exports to countries like USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Kuwait, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium persulfate, potassium peroxymonopersulfate, sodium bromate etc. We also supply other coated or encapsulated products like citric acid, guar crosslinkers other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard and several speciality chemicals.

Disodium Phosphate or Sodium Phosphate Dibasic SDS of Suppliers Exporters, Manufacturers

Disodium Phosphate
CAS Number: 10039-32-4 for Dodecahydrate, 7782-85-6 for Heptahydrate, 10028-24-7 for Dihydrate, 118830-14-1 for Monohydrate, 10140-65-5 for Hydrate, 7558-79-4 for Anhydrous Sodium Phosphate Dibasic USP NF Analytical Reagent FCC Food Grade Suppliers Exporters, Manufacturers
Disodium Phosphate or Sodium Phosphate Dibasic Manufacturers Exporters

Disodium Phosphate or Sodium Phosphate Dibasic Manufacturers Exporters

Sodium Phosphate Dibasic SDS, Safety Data Sheet Disodium Phosphate
MSDS Sheet 15-May-22

Product Name & Other Names: Disodium phosphate or DSP or Disodium hydrogen phosphate or Di sodium phosphate or Sodium phosphate dibasic.
CAS No.: 7558-79-4 for Anhydrous and 10039-32-4 for Dodecahydrate
EINECS EC Number: EC Number 231-448-7
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Product Name & Other Names: Disodium phosphate or DSP or Disodium hydrogen phosphate or Di sodium phosphate or Sodium phosphate dibasic.
CAS Number: 7558-79-4 98
EINECS EC Number: EC Number 231-448-7

Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.

Fire: Di Sodium Phosphate is not considered to be a fire hazard.
Explosion: Disodium phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire over Di Sodium Phosphate.
Extinguishing Media Not recommended: None specified.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Vacuuming or wet sweeping may be used to avoid dust dispersal.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents, strong acids, alkaloids, lead acetate, antipyrine, chloral hydrate, resorcinol and pyrogallol.

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Appearance: It is white granular powder. Hygroscopic.
Odor: Odorless.
Odor threshold: Not applicable.
pH: No data available.
Relative density: around 2.1
Melting Point: 240C (464F) Converts to Na4P2O7.
Initial boiling point and boiling range: No data available.
Flash point: No data available.
Auto-ignition temperature: No data available.
Decomposition temperature: No data available.
Upper/lower flammability or explosive limits: No data available.
Vapor pressure: No data available.
Vapor density: No data available.
Evaporation rate: No data available.
Flammability (solid, gas): No data available.
Partition coefficient: n-octanol/water: No data available.
Solubility: Soluble in water.
Viscosity: No data available.
Molecular Weight: 141.96 for Anhydrous and 358.14 for Dodecahydrate
Chemical Formula: Na2HPO4 for Anhydrous and Na2HPO4-12H20 for Dodecahydrate.

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Sodium and phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, strong acids, alkaloids, lead acetate, antipyrine, chloral hydrate, resorcinol and pyrogallol.
Conditions to Avoid: Incompatibles.

Oral rat LD50: 17 gm/kg. Skin rabbit, standard Draize, 500 mg/24H, mild. Eye rabbit, standard Draize, 500 mg/24H mild.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC NTP ACGIH OSHA.
Mutagenic Effects: No data available.
Teratogenic Effects: No data available.
Developmental Toxicity: No data available.
Reproductive Effects: No data available.

Aquatic toxicity: LC50 1650 mg/l (Orfe, golden (Leuciscus Idus))
Persistence and Degradability: No information available.
Mobility: No data available.
Bioaccumulation/ Accumulation: No data available.
Results of PBT and vPvB assessment: No data available.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

DOT USA, TDG Canada & ADR/RID Europe: Not controlled.
IMDG/IMO: Not controlled.
IATA/ICAO: Not controlled.

USA:
SARA 311/312: See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Monosodium Phosphate or Sodium Phosphate Monobasic CAS Number 7558-80-7 for Anhydrous 13472-35-0 for Dihydrate 10049-21-5 for Monohydrate, Disodium Phosphate or Sodium Phosphate Dibasic CAS Number 10039-32-4 for Dodecahydrate, 7782-85-6 for Heptahydrate, 10028-24-7 for Dihydrate, 118830-14-1 for Monohydrate, 10140-65-5 for Hydrate, 7558-79-4 for Anhydrous & Trisodium Phosphate or Sodium Phosphate Tribasic CAS Number 10101-89-0 for Dodecahydrate and 7601-54-9 for Anhydrous Supplier Exporter, Manufacturer:

Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

Exporters to USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.