Ammonium Chloride, Ammonium Sulfate Manufacturer Exporter

Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of Ammonium Chloride & Ammonium Sulfate and oil field shale gas fracking or hydraulic fracturing chemicals and speciality chemicals and it has substantial exports to countries like USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Kuwait, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium persulfate, potassium peroxymonopersulfate, sodium bromate etc. We also supply other coated or encapsulated products like citric acid, guar crosslinkers other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard and several speciality chemicals.

Ammonium Chloride IP BP Ph Eur USP FCC Reagent Grade & Ammonium Sulfate USP NF Reagent FCC Food Grade Suppliers Exporters, Manufacturers

Assay: Ammonium Chloride contains not less than 99.5 percent and not more than 100.5 percent of NH4Cl, calculated on the dried basis.
Identification: A solution (1 in 10) responds to the tests for Ammonium and for Chloride
pH: between 4.6 and 6.0, in a solution (1 in 20).
Loss on drying: Dry it over silica gel for 4 hours: it loses not more than 0.5% of its weight.
Residue on ignition: Add 1 mL of sulfuric acid to about 2 g, accurately weighed, and heat the mixture gently until volatilization is complete: the residue is white, and when ignited, not more than 0.1% of nonvolatile substance remains.
Limit of thiocyanate: Acidify 10 mL of a solution (1 in 10) with hydrochloric acid, and add a few drops of ferric chloride TS: no orange-red color is produced.
Heavy metals: 0.001%.

DEFINITION
Content or Assay
99.0 per cent to 100.5 per cent (On dried substance basis).

CHARACTERS
Appearance
White or almost white, crystalline powder or colorless crystals.
Solubility
Freely soluble in water.

IDENTIFICATION
A. It gives the reactions of chlorides.
B. 10 ml of solution gives the reaction of ammonium salts.

TESTS
Solution S: A 10% solution:
Appearance of solution: Solution is clear and colorless.
Acidity or alkalinity: To 10 ml of solution S add 0.05 ml of methyl red solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the color of the indicator.
Bromides and iodides: To 10 ml of solution S add 0.1 ml of dilute hydrochloric acid R and 0.05 ml of chloramine solution. After 1 min, add 2 ml of chloroform R and shake vigorously. The chloroform layer remains colorless.
Sulphates: Maximum 150 ppm.
Calcium: Maximum 200 ppm.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.00 g by drying in an oven at 105C for 2 h.
Sulphated ash: Maximum 0.1 per cent, determined on 2.0 g.

DESCRIPTION
Ammonium Chloride occurs as colorless crystals or as a white, fine or coarse, crystalline powder. It is somewhat hygroscopic. One gram dissolves in 2.6 mL of water at 25C, in 1.4 mL of boiling water, in about 100 mL of alcohol, and in about 8 mL of glycerin. The pH of a 1:20 solution is between 4.5 and 6.0.

Ammonium Chloride Analytical Reagent
NH4Cl Formula Weight 53.49
CAS Number 12125-02-9

REQUIREMENTS
Assay: 99.5% minimum NH4Cl
pH of a 5% solution: 4.5 to 5.5 at 25C

MAXIMUM ALLOWABLE
Insoluble matter:0.005%
Residue after ignition: 0.01%
Calcium (Ca): 0.001%
Magnesium (Mg): 5 ppm
Heavy metals (as Pb): 5 ppm
Iron (Fe): 2 ppm
Phosphate (PO4): 2 ppm
Sulfate (SO4): 0.002%

Ammonium Sulfate USP NF Grade Specifications
(NH4)2SO4 -- 132.14
Ammonium sulfate [CAS 7783-20-2]

Ammonium Sulfate contains not less than 99.0 percent and not more than 100.5 percent of (NH4)2SO4.

Identification: A solution (1 in 20) responds to the tests for Ammonium and for Sulfate.
Microbial limits: The total aerobic microbial count does not exceed 1000 cfu per g, and the total combined molds and yeasts count does not exceed 10 cfu per g.
pH: between 5.0 and 6.0, in a solution.
Residue on ignition: Not more than 0.005%, determined on a 20-g sample.
Limit of insoluble matter: Maximum 0.005%).
Limit of phosphate: To pass the test.
Limit of chloride: To pass the test.

Ammonium Sulfate FCC Food Grade Specifications
Ammonium Sulfate or Ammonium Sulphate
(NH4)2SO4 Formula weight 132.14
INS: 517 CAS 7783-20-2

DESCRIPTION
Ammonium Sulfate occurs as colorless or white crystals or granules that decompose at temperatures above 280C. One gram is soluble in about 1.5 mL of water. It is insoluble in alcohol. The pH of a 0.1 M solution is between 4.5 and 6.0.
Function: Dough conditioner; yeast nutrient.

REQUIREMENTS
Identification: A sample gives positive tests for Ammonium and for Sulfate.
Assay: Not less than 99.0% and not more than 100.5% of Ammonium Sulphate or Ammonium Sulfate (NH4)2SO4.
Lead: Not more than 3 mg/kg.
Residue on Ignition: Not more than 0.25%.
Selenium: Not more than 0.003%.

Ammonium Sulfate Analytical Reagent Grade Specifications
Ammonium Sulphate
(NH4)2SO4
Formula Weight 132.14
CAS Number 7783-20-2

Ammonium Chloride CAS Number 12125-02-9 & Ammonium Sulfate CAS Number 7783-20-2 Supplier Exporter, Manufacturer:

Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

Exporters to USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.

Assay of Ammonium Sulphate or Ammonium Sulfate	99.0% (NH4)2SO4
pH of a 5% solution	5.0-6.0 at 25C

Insoluble matter	0.005%
Residue after ignition	0.005%
Chloride (Cl)	5 ppm
Nitrate (NO3)	0.001%
Phosphate (PO4)	5 ppm
Heavy metals (as Pb)	5 ppm
Iron (Fe)	5 ppm