Benzoic Acid SDS of Manufacturer Exporter

Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of Benzoic Acid & Benzoyl Peroxide and oil field shale gas fracking or hydraulic fracturing chemicals and speciality chemicals and it has substantial exports to countries like USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Kuwait, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium persulfate, potassium peroxymonopersulfate, sodium bromate etc. We also supply other coated or encapsulated products like citric acid, guar crosslinkers other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard and several speciality chemicals.

Benzoic Acid SDS of Suppliers Exporters, Manufacturers

Benzoic Acid
CAS Number: 65-85-0 USP BP Ph Eur FCC Food Grade Suppliers Exporters, Manufacturers
Benzoic Acid Manufacturers Exporters

Product Name & Other Names: Benzoic Acid or Benzenecarboxylic acid or benzeneformic acid or phenyl carboxylic acid or phenyl formic acid or dracylic acid.
CAS No.: 65-85-0
EINECS EC Number: 200-618-2
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation (Category 2) H315
Eye damage (Category 1), H318
Specific target organ toxicity, repeated exposure (Category 1) H372

Hazard statements:
H315 Causes skin irritation.
H318 Causes serious eye damage.
H372 Causes damage to organs (Lungs) through prolonged or repeated exposure if inhaled.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P262 Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P314 Get Medical advice/attention if you feel unwell.
P302+352: IF ON SKIN: Wash with soap and water.
P332+313: If skin irritation occurs: Get medical advice/attention.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.

Product Name & Other Names: Benzoic Acid or Benzenecarboxylic acid or benzeneformic acid or phenyl carboxylic acid or phenyl formic acid or dracylic acid.
CAS No.: 65-85-0
EINECS EC Number: 200-618-2

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Give several glasses of water to drink to dilute. If copious amounts were swallowed, get medical advice.
Skin Contact: Wash exposed area with soap and water. Get medical advice if irritation develops.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.

Fire: Flash point: 121C (250F) CC
Auto ignition temperature: 570C (1058F)
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard. Minimum exposable concentration 0.011 g/l. Vapor may explode if ignited in an enclosed area. Vapor from molten benzoic acid may form explosive mixture with air.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At elevated temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Neutralize the residue with a dilute solution of sodium carbonate. Finish cleaning by spreading water on the contaminated surface and allow to drain as per law.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents and metals. Keep in a well closed container stored under cold to warm conditions, 2 to 40 C, (36 to 104F). Isolate from any source of heat or ignition. Isolate from oxidizing materials. Isolate from flammable materials.

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Appearance: White, needle-like crystals.
Odor: Faint pleasant odor.
Odor threshold: No data found.
pH: 2.8 (saturated solution @ 25 0C)
Relative density: around 1.32
Boiling Point: 249C (480F)
Melting Point: 122C (252F)
Flash point: Not available.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor Density (Air=1): 4.2
Vapor Pressure (mm Hg): 1 @ 96C (205F)
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: 0.29 g / 100 ml. water; sinks in water.
Viscosity: No data found.
Molecular Weight: 122.12
Chemical Formula: C6H5COOH

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Emits toxic vapors and gas including phenol, benzene, and carbon monoxide when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents, bases, and metals. Water solutions can react with metals to produce hydrogen gas.
Conditions to Avoid: Heat, flame, ignition sources, dusting, and incompatibles.

Oral rat LD50: 1700 mg/kg; LC50 rat > 26,000mg/L/Hr.; irritation skin rabbit: 500 mg/24H mild; eye rabbit: 100 mg severe; investigated as a mutagen.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.
Mutagenic Effects: No data found.
Teratogenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.

Environmental Fate: When released into the soil, Benzoic Acid may leach into groundwater. When released into the soil, Benzoic Acid is expected to readily biodegrade. When released into the soil, this material is expected to have a half-life between 1 and 10 days. When released into water, Benzoic Acid is expected to readily biodegrade. When released into the water, this material is expected to have a half-life between 1 and 10 days. When released into water, this material is not expected to evaporate significantly. This material has a log octanol-water partition coefficient of less than 3.0. This material may bio accumulate to some extent. When released into the air, this material is expected to be moderately removed from the atmosphere by wet deposition. When released to the air, this material is subject to removal from the atmosphere by gravitational settling.
Environmental Toxicity: No data found.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMDG/IMO: Not regulated.
IATA/ICAO: Not regulated.

Benzoic Acid CAS Number 65-85-0 & Benzoyl Peroxide CAS Number 94-36-0 Supplier Exporter, Manufacturer:

Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

Exporters to USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.