Zinc Acetate Dihydrate Anhydrous SDS of Suppliers Exporters, Manufacturers
Zinc Acetate
CAS Number: 5970-45-6 Dihydrate 557-34-6 Anhydrous USP BP Ph Eur Analytical Reagent Grade Suppliers Exporters, Manufacturers
Please visit Main Page of Zinc Acetate Dihydrate Anhydrous USP BP Ph Eur Analytical Reagent Grade Manufacturers.
Zinc Acetate SDS GHS, Safety Data Sheet
MSDS Sheet 15-May-221. PRODUCT DESCRIPTION
Product Name & Other Names: Zinc Acetate.
Synonyms: Acetic acid zinc salt or Zinc diacetate.
CAS Number: 5970-45-6 Dihydrate 557-34-6 Anhydrous
EINECS EC Number: 209-170-2
Suppliers: As per letterhead.2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Acute toxicity, Oral Category 4, H302
Skin corrosion/irritation Category 3, H316
Serious eye damage/eye irritation Category 2A, H319
Hazardous to the aquatic environment, long-term hazard Category 1, H410Labelling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Aquatic ToxicityGHS Label Elements
IrritantSignal Words: Warning
Hazard statements:
H302: Harmful if swallowed.
H316: Causes mild skin irritation.
H319: Causes serious eye irritation.
H410: Very toxic to aquatic life with long lasting effects.Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270: Do not eat, drink, or smoke when using this product.
P273 Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get Medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P332+313: If skin irritation occurs: Get medical advice/attention.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.3. COMPOSITION/INFORMATION ON INGREDIENTS
Product Name & Other Names: Zinc Acetate.
Synonyms: Acetic acid zinc salt or Zinc diacetate.
CAS Number: 5970-45-6 Dihydrate 557-34-6 Anhydrous.
EINECS EC Number: 209-170-24. FIRST AID MEASURES
Eyes - Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt, or waistband.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Keep person warm, quiet, and get medical attention.5. FIREFIGHTING PROCEDURES
Extinguisher Media: Use media suitable to extinguish surrounding fire.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.6. SPILL OR LEAK PROCEDURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.7. SPECIAL PRECAUTIONS
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like strong oxidizing agents and alkalis. Keep away from sources of ignition. Ground all equipment containing material.8. SPECIAL PROTECTION INFORMATION
Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.9. PHYSICAL DATA
Appearance and Odor: Zinc Acetate is white crystals, faint acetic acid odor
Odor: Not available.
Odor threshold: Not available.
pH: No data found.
Relative density: about 1.74 for Dihydrate.
Melting point/freezing point: No data found.
Initial boiling point and boiling range: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility in Water: Appreciable (>10%)
Viscosity: No data found.
Molecular Weight: 219.51 for Dihydrate.
Melting Point: 237 C (458 F) for Dihydrate.10. REACTIVITY DATA
Stability: Zinc Acetate is stable
Conditions to Avoid: Heat
Incompatibility (Materials to Avoid): Alkalis, strong oxidizing agents
Hazardous Decomposition Products: Oxides of Zinc, carbon monoxide, carbon dioxide
Hazardous Polymerization: Will not occur.11. TOXICITY DATA
Toxicity Data: oral rat LD50: 2460 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No data found.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.12. ECOLOGICAL DATA
Toxicity to fish: LC50 - Oncorhynchus mykiss (rainbow trout) - 0,55 mg/l - 96,0 h
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found.
Other adverse effects: Very toxic to aquatic life with long lasting effects.13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose of in accordance with all legal regulations.
14. TRANSPORT INFORMATION
DOT USA, TDG Canada & ADR/RID Europe:
UN number: 3077
Proper shipping name: Hazardous substance, solid, n.o.s. (Zinc Acetate)
Hazard class(es): 9, Packaging group: III
IMDG/IMO & IATA/ICAO:
UN number: 3077
Proper shipping name: Hazardous substance, solid, n.o.s. (Zinc Acetate)
Hazard class(es): 9, Packaging group: III.15. REGULATORY INFORMATION
USA Regulations:
California Proposition 65: Not listed.
SARA 311/312 Hazards: See section 2.Section 16 - Additional Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.Please visit Technical Data Sheet of Zinc Acetate Dihydrate Anhydrous USP BP Ph Eur Analytical Reagent Grade Suppliers.
Zinc Acetate CAS Number 5970-45-6 Dihydrate 557-34-6 Anhydrous & Zinc Citrate Dihydrate Anhydrous CAS Number 546-46-3 Anhydrous & 5990-32-9 Dihydrate Supplier Exporter, Manufacturer:
Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.e-mail: info@anniechemie.com
Copyright and Usual Disclaimer is Applicable.
October 1, 2023Exporters to USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.
Perfection is made up of small things and that is a big thing.