Sodium Sulfide Nonahydrate n Sodium Sulfate Manufacturer Exporter

Annie Chemie P Ltd, is a company at Dahej in Gujarat, India. It is a manufacturer exporter of Sodium Sulfide Nonahydrate & Sodium Sulfate and oil field shale gas fracking or hydraulic fracturing chemicals and speciality chemicals and it has substantial exports to countries like USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Kuwait, Dubai etc. We have developed encapsulated guar gel breaker based on coated ammonium persulfate, potassium persulfate, sodium persulfate, potassium peroxymonopersulfate, sodium bromate etc. We also supply other coated or encapsulated products like citric acid, guar crosslinkers other shale gas frac related products like diverting agent, KCl-substitute or clay-stabilizer, corossion inhibitors, scale inhibitor, bio-guard and several speciality chemicals.

Sodium Sulfide Nonahydrate USP Reagent Grade & Sodium Sulfate Decahydrate Anhydrous EP Ph Eur USP BP IP Analytical Reagent FCC Food Grade Suppliers Exporters, Manufacturers

Sodium Sulfide Nonahydrate
CAS Number: 1313-84-4 for Nonahydrate & 1313-82-2 USP Reagent Grade for Anhydrous Suppliers Exporters, Manufacturers
Sodium Sulfide Nonahydrate Manufacturers Exporters

Sodium Sulfide Nonahydrate Manufacturers Exporters

Sodium Sulfide USP Grade Specifications
Na2S.9H2O -- 240.18
Sodium sulfide nonahydrate.
Disodium sulfide nonahydrate [CAS 1313-84-4].

Sodium Sulfide contains not less than 98.0 percent and not more than 103.0 percent of Na2S.9H2O.

Identification: [NOTE: Conduct this test in a fume hood.] Transfer about 100 mg of Sodium Sulfide, to a suitable container, add 10 mL of 3 N hydrochloric acid, and cover the top of the container with filter paper saturated with a 0.2 M lead acetate solution: a brownish or silvery-black color forms on the paper.
Limit of iron: Dissolve about 5.0 g in 100 mL of water: the solution is clear and colorless.
Limit of sulfite and thiosulfate: Dissolve 3.0 g in 200.0 mL of filtered and degassed water. Add 100.0 mL of 0.2 N zinc sulfate, mix, and allow to stand for 30 minutes. Filter, add 1 mL of starch, and titrate 100.0 mL of the filtrate with 0.01 N iodine: not more than 3.0 mL is required.

Sodium Sulfide Nonahydrate Analytical Reagent Grade Specifications
Na2S-9H2O --- Formula Weight 240.18
CAS Number 1313-84-4
NOTE: To enhance stability, storage below 10C is recommended.

REQUIREMENTS
Appearance: Crystals, colorless or with only a slight yellow color
Assay: 98.0% Na2S-9H2O

MAXIMUM ALLOWABLE
Ammonium (NH4): 0.005%
Sulfite and thiosulfate (as SO4): 0.1%
Iron: Passes test.

Sodium Sulfate
CAS Number: 7757-82-6 for anhydrous and 7727-73-3 for decahydrate Decahydrate Anhydrous EP Ph Eur USP BP IP Analytical Reagent FCC Food Grade Suppliers Exporters, Manufacturers
Sodium Sulfate Decahydrate Manufacturers Exporters

Sodium Sulfate Decahydrate Manufacturers Exporters

Sodium Sulfate Anhydrous Manufacturers Exporters

Identification:
(a)It gives the reactions of sulphates.
(b)It gives the reactions of sodium.
(c)It complies with the test for Loss on drying.

Solubility: Freely soluble in water.
Appearance of solution: Solution S is clear and colorless
Acidity or alkalinity: To 10ml of solution S add 0.1ml of bromothymol blue solution R1. Not more than 0.5ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the color of the indicator.
Chlorides: Maximum 450 ppm
Calcium: Maximum 450 ppm
Iron: Maximum 90 ppm
Magnesium: Maximum 200 ppm
Heavy metals: Maximum 45 ppm
Loss on drying:Maximum 0.5%
Assay: Not less than 98.5% and not more than 101.0% (dried substances).

CHARACTERS
Appearance: White or almost white powder, hygroscopic.
Solubility: Freely soluble in water.

IDENTIFICATION
A. It gives the reactions of sulphates.
B. It gives the reactions of sodium.
C. It complies with the test for loss on drying (see Tests).

TESTS
Solution S: Dissolve 2.2 g Sodium Sulfate in carbon dioxide-free water R prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Chlorides: Maximum 450 ppm.
Calcium: Maximum 450 ppm, if intended for use in the manufacture of parenteral dosage forms.
Iron: Maximum 90 ppm, if intended for use in the manufacture of parenteral dosage forms.
Magnesium: Maximum 200 ppm, if intended for use in the manufacture of parenteral dosage forms. To 10 ml of solution S add 1 ml of glycerol (85 per cent), 0.15 ml of titan yellow solution, 0.25 ml of ammonium oxalate solution and 5 ml of dilute sodium hydroxide solution and shake. Any pink colour in the test solution is not more intense than that in a standard prepared at the same time in the same manner using a mixture of 5 ml of magnesium standard solution (10 ppm Mg) and 5 ml of water.
Heavy metals: Maximum 45 ppm.
Loss on drying: Maximum 0.5 per cent, determined on 1.000 g by drying in an oven at 130C.

Sodium Sulfate USP Grade Specifications
Na2SO4-10H2O -- 322.20
Sulfuric acid disodium salt, decahydrate.
Disodium sulfate decahydrate CAS 7727-73-3
Anhydrous 142.04 CAS 7757-82-6

Sodium Sulfate contains ten molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent of Na2SO4, calculated on the dried basis.

Identification: A solution (1 in 20) responds to the tests for Sodium 191 and for Sulfate.
Acidity or alkalinity: To 10 mL of a solution, containing the equivalent of 1.0 g of Na2SO4-10H2O in 20 mL of water, add 1 drop of bromothymol blue TS: not more than 0.50 mL of either 0.010 N hydrochloric acid or 0.010 N sodium hydroxide is required to change the color of the solution.
Loss on drying: Dry at 105 for 4 hours: the decahydrate loses between 51.0% and 57.0% of its weight, and the anhydrous form loses not more than 0.5% of its weight.
Chloride: A portion equivalent to 1.0 g of Na2SO4-10H2O ( Sodium Sulfate Decahydrate )shows no more chloride than corresponds to 0.30 mL of 0.020 N hydrochloric acid (0.02%).

Specifications of Sodium Sulfate FCC Food Grade
Na2SO4-10H2O -- 322.20
Sulfuric acid disodium salt, decahydrate.
Disodium sulfate decahydrate CAS 7727-73-3
Anhydrous 142.04 CAS 7757-82-6.

Sodium Sulfate contains ten molecules of water of hydration, or is anhydrous. It contains not less than 99.0 percent of Na2SO4, calculated on the dried basis.

Identification: A solution (1 in 20) responds to the tests for Sodium and for Sulfate.
Acidity or alkalinity: To 10 mL of a solution, containing the equivalent of 1.0 g of Na2SO4-10H2O in 20 mL of water, add 1 drop of bromothymol blue TS: not more than 0.50 mL of either 0.010 N hydrochloric acid or 0.010 N sodium hydroxide is required to change the color of the solution.
Loss on drying: Dry at 105 for 4 hours: the decahydrate loses between 51.0% and 57.0% of its weight, and the anhydrous form loses not more than 0.5% of its weight.
Chloride A portion equivalent to 1.0 g of Na2SO4-10H2O shows no more chloride than corresponds to 0.30 mL of 0.020 N hydrochloric acid (0.02%).
Heavy metals: the limit is 0.001%.

Sodium Sulfate Anhydrous Analytical Reagent Grade Specifications
Na2SO4
Formula Weight 142.04
CAS Number 7757-82-6

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on ignition: 0.5%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 5 ppm
Phosphate (PO4): 0.001%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 0.001%
Calcium (Ca): 0.01%
Magnesium (Mg): 0.005%
Potassium (K): 0.01%

Sodium Sulfate Decahydrate Analytical Reagent Specifications
Na2SO4-10H2O
Formula Weight 322.19
CAS Number 7727-73-3

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 5 ppm
Nitrogen compounds (as N): 3 ppm
Phosphate (PO4): 5 ppm
Heavy metals (as Pb): 3 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.003%
Potassium (K): 0.005%.

Sodium Sulfide Nonahydrate CAS Number 1313-84-4 for Nonahydrate & 1313-82-2 for Anhydrous & Sodium Sulfate Decahydrate Anhydrous CAS Number 7757-82-6 for anhydrous and 7727-73-3 for decahydrate Supplier Exporter, Manufacturer:

Annie Chemie P Ltd
Mumbai 4000010, INDIA
With Agents and offices in UAE, USA, Europe.

Exporters to USA, Canada, UK, Europe, UAE, Nigeria, Algeria, Turkey, Mexico, Brazil, Chile, Argentina, Australia, Dubai etc.